AIRFLOW dental cleaning technology
Airflow Teeth Cleaning in Torrevieja
Airflow is a professional cleaning technique that removes plaque, dental biofilm and surface staining with a fine jet of warm water, air and an ultra-fine erythritol powder — no metal scraper touching the tooth. At AP-Denta we use the Airflow® Prophylaxis Master system from the Swiss manufacturer EMS, the technology behind the Guided Biofilm Therapy (GBT) protocol, which is still rare on the Costa Blanca.
Why patients trust AP-Denta
in Torrevieja and the Costa Blanca
Airflow Plus erythritol particles
smooth result typically lasts
The Airflow Prophylaxis Master combines a jet of water, air and erythritol powder with a low-force Piezon ultrasonic tip, built to clear biofilm and newly-formed tartar without harming the enamel or irritating the gum.
AP-Denta serves the whole Costa Blanca, and a large share of our English-speaking patients come from Orihuela Costa, La Zenia, and Ciudad Quesada. Free parking is available right outside the clinic.
We welcome patients from:
What the Airflow Prophylaxis Master system is
A large share of infections affecting the human body start as a biofilm — a colony of bacteria that settles on mucous membranes, including those inside the mouth. That biofilm, together with plaque and tartar above and below the gumline, is where cavities, gingivitis and periodontitis begin — and sustained gum inflammation has also been linked, in various studies, to wider health problems. That's why a proper clean shouldn't stop at polishing the visible tooth surface without clearing the biofilm first.
The Guided Biofilm Therapy (GBT) protocol organises the clean into steps designed to clear biofilm methodically rather than scraping blind. The Airflow Prophylaxis Master is the Swiss EMS device built around that protocol: it combines the Airflow nozzle (a jet of water, air and Airflow Plus erythritol powder, with particles as fine as 14 microns) with the Perioflow nozzle (for periodontal and peri-implant pockets up to 9mm deep, without removing crowns or orthodontic appliances) and the Piezon No Pain ultrasonic tip, reserved for the more stubborn tartar the powder jet can't shift on its own.
Who it's suitable for
- Staining from coffee, tea, wine or tobacco that's darkened natural enamel or a prosthesis
- Soft, lightly mineralised plaque, before it has a chance to harden into tartar
- Preparation before teeth whitening, dental implants, or prosthetics
- Maintenance around implants, veneers, crowns or braces — the Perioflow nozzle reaches those areas without removing anything
- Preventing peri-implantitis and gum recession in patients with implants or veneers
- Gingivitis or periodontitis, as part of treatment or ongoing maintenance
- Patients with sensitive teeth: water temperature is adjustable up to 40°C, and the power auto-adjusts to the thickness of the deposit
- Children and pregnant women — the erythritol powder is hypoallergenic and doesn't abrade the enamel
What happens, step by step
Assessment First
We check the mouth for decay, tartar and plaque before starting, so the session is built around what actually needs treating.
Disclosing Optional
A disclosing solution stains the biofilm a bright colour, which pinpoints it precisely and, as a bonus, shows you which areas your own daily brushing is missing.
Airflow nozzle 15–25 min
The jet of warm water, air and erythritol clears biofilm, staining and newly-formed tartar from the crown and the first few millimetres below the gumline, including between the teeth.
Perioflow nozzle If needed
For periodontal or peri-implant pockets 4–9mm deep, the Perioflow nozzle delivers the same powder through a narrow tip — no need to remove crowns, veneers or orthodontic appliances.
Piezon No Pain ultrasonic If needed
If any hardened tartar remains that the powder jet couldn't lift, a low-force ultrasonic tip removes it at the minimum power needed, adjusting automatically to the resistance it meets.
Review and fluoride Last
The disclosing solution is reapplied to confirm no biofilm is left, and a remineralising gel or fluoride treatment is applied to the clean teeth before you're given home-care advice.
When to tell us first
- An acute respiratory infection or active inflammation in the mouth — we'd rather wait until it's settled before the session
- A known allergy to any component of the powder — rare, but worth flagging in advance
- Very inflamed or easily bleeding gums — still treatable, we just adjust the technique
- Very sensitive teeth — we adjust the water temperature and power so the session stays comfortable
How it differs from a conventional clean
A clean using only traditional ultrasonic scaling scrapes the whole surface evenly, including healthy tooth structure, and can feel uncomfortable on sensitive teeth. The Airflow Prophylaxis Master reverses that order: the powder jet first clears everything it safely can without touching the enamel, and the ultrasonic tip — low-power and self-adjusting — is kept for the tartar that genuinely needs it. The result is a session that's generally pain-free, gentler than conventional techniques, and safe over crowns, veneers, fillings, implants and braces, because the erythritol particles don't damage those surfaces.
After your session
- Avoid very cold, very hot, sweet or acidic food and drink for the first hour
- For the first few hours, also avoid coffee, black tea, red wine and other strongly-coloured drinks
- Don't smoke on the day — it slows gum healing if any work was done close to the gumline
- Brush with a soft brush and a sensitivity toothpaste for the first few days
- Use a mouthwash after meals to help the result settle in
- Don't use a whitening toothpaste without checking with us first — the enamel is temporarily more receptive straight after
Cost of treatment
The price depends on whether the session is limited to the Airflow nozzle or also involves Perioflow or Piezon ultrasonic work, and on how much tartar and staining needs treating. At the consultation, we'll assess your case and give you the exact price before starting.
Frequently asked questions
Does an Airflow clean hurt?
It's generally pain-free. The jet of water, air and erythritol doesn't scrape the enamel the way a traditional scaler does, and the water temperature can be adjusted for sensitive teeth. If the ultrasonic tip is needed on a spot with more tartar, you'll feel a slight vibration, never pain.
Is it safe with implants, veneers or braces?
Yes. The Perioflow nozzle was designed specifically to clean around implants, veneers, crowns and orthodontic appliances without removing them, and the erythritol particles don't damage those surfaces.
How long does the result last?
The smooth surface typically lasts 5 to 8 months, depending on how you look after it at home. If you smoke or drink a lot of coffee, tea or wine, it's worth repeating every 3–4 months instead.
Is this the same as a regular dental clean?
They work together. Airflow clears soft plaque, biofilm and staining very comfortably, but tartar that's already hardened still needs ultrasonic scaling to shift — which is why the protocol uses both tools, depending on what we find on each tooth. See also our page on professional dental hygiene.
Does it whiten teeth?
By clearing surface staining, the enamel usually returns closer to its natural shade and can look one or two shades lighter — but it isn't a whitening treatment in itself. Ask us about that option if you want a shade lighter than your natural colour.
Visit us
| Address | Torrevieja, Pasaje País Vasco, edificio 1, local 4 |
| Phone | +(34) 638 893 141 |
| +(34) 638 893 141 | |
| apdenta@gmail.com | |
| Hours | Monday to Friday, 10:00–20:00, by appointment |
We welcome patients from Torrevieja, Orihuela Costa, La Zenia, Ciudad Quesada and the rest of the Costa Blanca and Vega Baja.
Book an appointment
Contact Information:
| Torrevieja, Pasaje Pais Vasco, edificio 1 local 4 | |
| +(34) 638 893 141 | |
| +(34) 638 893 141 | |
| apdenta@gmail.com | |
| Working hours: Mon - Fri: from 10:00 to 20:00 |